Modello - Modèle - Model
Modell - Modelo - Modelo
SHAPE HOT TABLE
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
Epta Spa -
Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
16/26
N°DOC. UM000311 REV. "C" - 18/01/22
IT
FR
EN
DE
ES
PT
EN
Functions
The device is designed to offer two operating
options:
• HUMIDIFIED version with water filling
• HOT AIR function
Both versions have a heated ceiling light.
To activate the “HOT AIR” function, take switch
(3) to ON. A forced flow (by fans) of hot air is
circulated on the display deck.
To activate the “STEAM” function, with the (3)
switch in ON position, take the (5) switch to ON.
The appliance starts to produce steam which is
circulated by the flow of hot air.
An internal function will allow the production of
steam only after 35 minutes have passed from
switching on the HOT AIR function even if the
STEAM button is pressed.
F
The “STEAM” function can only be
activated with the “HOT AIR” function
on.
To activate the “CEILING HEATING LAMP” take
switch (2) to ON.
Control panel
1
2
3
4
Fig. 36
1. Button to increase temperature
2. Button to decrease temperature
3. Function button
4. SET key
TEMPERATURE SETTING AND CONTROLS
Press and instantly release (4) key
SET appears on the display.
Press (4) key again and the SETPOINT value
appears on the display.
To change the value, press the keys (1) (to
increase) or (2) (to lower) within 15 seconds to
choose the new value.
F
To modify parameters that modify the
operation of the display cabinet, contact
the installer or a specialist technician.
Summary of Contents for Design DD
Page 159: ......
