Modello - Modèle - Model
Modell - Modelo - Modelo
SHAPE HOT TABLE
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
Epta Spa -
Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
20/26
N°DOC. UM000311 REV. "C" - 18/01/22
IT
FR
EN
DE
ES
PT
DE
9.
HINWEISE FÜR DEN NUTZER
9.1
Beschreibung des Kühlmöbels
Das Möbel ist ausschließlich für die kurzzeitige
Aufbewahrung warmer Speisen geeignet, und
zwar ausschließlich für die Zeit, in der der
Verkauf stattfindet.
Jede andere Verwendung, wie zum Beispiel das
Garen oder eine längere Aufbewahrung der
Speisen, ist untersagt.
Die allgemeinen Eigenschaften und die
Abmessungen sind in den Abbildungen und in
den Abschnitten der aufgeführt: "Allgemeine
Beschreibung" (ab S. "6" bis S. "10").
F
Es wird darauf hingewiesen, dass der
Innenbereich des Gerätes, und dabei
insbesondere die Wärmelampe, hohe
Temperaturen erreicht. Dasselbe gilt
für die äußeren Oberflächen in direkter
Nähe, die durch die Wärmestrahlung im
Geräteinneren mit erwärmt werden. Es
wird empfohlen, die oberen Gliedmaßen
mittels geeigneter Schutzkleidung vor
der ärmestrahlung und vor
versehentlichem Kontakt mit heißen
Gerätenteilen zu schützen. Nicht
geschulte Personen müssen vor dem
direkten Kontakt mit den vorgenannten
Oberflächen geschützt werden.
9.2
Transport und Bewegung des
Kühlmöbels
Das Möbel befindet sich in einer speziellen
Verpackung mit einem Transportsockel für den
Gabelstapler.
Verwenden Sie für die Bewegung des Möbels:
• Ausschließlich einen speziell geeigneten
oder gleichwertigen Transportsockel
• Einen manuellen oder elektrischen
Hubwagen, der für das Anheben des
Möbels geeignet ist und über die
vorgeschriebenen Eigenschaften verfügt
Das Gerätegewicht (Leergewicht und mit
Verpackung) und die Abmessungen der
Verpackung sind im Abschnitt aufgeführt:
"Transport des Kühlmöbels" (Tabelle "Tab. I" und
Abb. auf S. "11").
Die Durchführung der Positionierungsarbeiten
muss durch qualifiziertes Personal erfolgen.
Dieses muss in der Lage sein, das Gewicht, die
Hebepunkte und die für die Sicherheit und
Tragfähigkeit am besten geeigneten Hilfsmittel
richtig einzuschätzen.
9.3
Empfang und Lagerung des
Möbels
Überprüfen Sie den Zustand der Verpackung,
bevor Sie das Gerät in Empfang nehmen.
Sollte die Verpackung sichtbare Beschädigungen
aufweisen:
• Entfernen Sie die Verpackung unter den
Augen des Lieferanten.
• Quittieren Sie den Empfang des Dokuments
unter Vorbehalt.
Der Hersteller haftet nicht für Schäden, die durch
den Transport oder die unsachgemäße Lagerung
des Kühlmöbels entstehen.
Das Gerät muss an einem Ort gelagert werden,
der vor Sonneneinstrahlung und
Witterungseinflüssen geschützt ist und in dem
eine Temperatur zwischen -25°C und +55°C
sowie eine Luftfeuchtigkeit zwischen 30% und
95% herrschen.
9.4
Installation und Umgebungsbe-
dingungen
Das Gerät ist nicht für die Installation im Freien
geeignet.
Für den korrekten Betrieb müssen bei der
Positionierung des Geräts folgende
Voraussetzungen erfüllt sein:
• Das Gerät muss auf einem ebenen
Untergrund aufgestellt werden. ("Abb.
24").
• Es dürfen sich keine Wärmequellen, direkte
Sonneneinstrahlung, Türen, Fenster,
Ventilatoren oder Lüftungsöffnungen in der
Nähe befinden ("Abb. 25").
Summary of Contents for Design DD
Page 159: ......