-36-
TEMPERATURE SETTING AND CONTROLS
Each refrigerating appliance is provided with an electronic control for automatic maintenance of the appropriate
pre-established temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold you can increment or decrement the temperature:
•
Press the (Set) (2 sec.) key
in order to see on display the temperature set point.
•
Press the
(
)
key or the
(
)
key
in order to increment or decrement the temperature set point.
•
Press the (
Set
)
key
in order to store the new temperature set point.
1. Light switch
2. Automatic defrosting button
3. Button to show set temperature
4. Button to decrease temperature
5. Button to increase temperature
1
2
3
4
5
1
2
3
4
5
LED
MODE
Meaning
ON
Active compressor
Flashing
Delay against close starts
ON
Defrosting in progress
Flashing
Dripping in progress
ON
Fans on
Flashing
Fans start delay in progress
ON
A temperature alarm activated
ON
Continuous cycle in progress
LED
MODE
Meaning
ON
Energy saving in progress
ON
Light on
ON
Auxiliary active
ON
Unit of measurement
Flashing
Programming
ECO
ON
Energy saving in corso
°C
