Page 24
3BE390691NM – 10/10
BONNET GRANDE CUISINE
Registered Office:
Rue des Frères Lumière - Z.I Mitry Compans
77292 MITRY MORY Cedex
The reading is indicated in hours or in tens of hours if the digital point is on or not.
Example: "10. 05" = 100 hours and 5 minutes
"10 05" = 10 hours and 5 minutes
Select the desired counter by turning the button 2 (from "n00" to "n10").
n00
Number of hours the equipment has been on since last servicing
n01
Number of working hours in the DRY mode.
n02
Number of working hours in the STEAM mode.
n03
Number of working hours in the COMBI mode
n04
How many times the door has been closed (activated sensor)
n05
Quantity of cleaning cycles (completed)
n06
Quantity of cooling cycles (initiated)
n07
How many times the safety inlet has been activated
n08
Duration that the electronic equipment has been subject to a
temperature over 65°C
n09
Number of automatic resets executed by the micro (it does not delete
the counters)
N10
Cumulated hours the equipment has been switched on
Counter reset for next servicing
Turn button 2 after "n10" so that the indicator opposite button 2 indicates "rSr"
Button 2
Button 3
Button 2 (turn it anti-clockwise)
The reset of the counter for next servicing is completed.
10.3 ASSISTANCE FOR MAINTENANCE
This programme prompts each outlet of the relay card so that its operation is verified. These actions may
be used for checking, for example, that a relay is not stuck (fluttering..) or the coil / draw of a solenoid valve.
Follow the procedure above till the indicator opposite button 2 shows "n00".
Button 1
The display opposite button 2 must show "7".
