service.
Call:1-844-728-6917
Eamil:customer-care@bonsaii.com
To ensure proper operation and function, periodic oiling of the cutting system is required.
Failure to oil your cutting system could result in reduced sheet capacity performance, excess
noise, paper jams and possibly machine failure. Oil your cutters every 5th or 6th time you
empty the basket, if excess squeaking and rubbing noise is coming from the machine or if the
shredders sheet capacity has diminished. Squeeze the lubricant across the full width of the
cutters. Push the switch to ‘AUTO’ position, and then insert paper to activate the cutting
system forward for 3 seconds. Then push the switch to ‘REV’ position to make shredder reverse
for 3 seconds. Alternate between AUTO and REV at least three times or until all paper clears
the cutters.
Cutter Oiling Instructions
Never use flammable synthetic oil, petroleum based or aerosol lubricants to oil your cutting
system. Use only a vegetable oil based lubricant in a non-aerosol container with
Notice
Summary of Contents for DocShred C209-D
Page 1: ...C209 D 10 Sheets Cross Cut...
Page 2: ...4...
