BonsenKitchen VS3905, Operation Instructions Manual

not be inserted further than the rear sealing ring and must lie between the front and
rear sealing ring. If the bag lies over one or both of the sealing rings, the bag cannot be
properly sealed.

5

The bag opening must lie 

fl

at on the welding wire. Otherwise, welding will not work

properly. Close the cover of the device. The seal presses the bag onto the sealing wire to
create a smooth seam. Make sure that both corners of the lid are closed. If necessary,
press the top cover again so that the lid clicks in audibly and 

fi

rmly. Select the mode

(Normal or Soft). When the selection is 

, the 

 indicator lights up. When 

Normal

Normal

Soft

Soft

 is selected, the indicator 

 will light up.

1. Buttons:
1) Soft                       2) Normal                       3) eal                      4) Stop

2. Indicate Light:
5) Soft Indicator                6) Normal Indicator               7) Seal Indicator  

3. Other Parts: 
8) Slide Cutter                   9) Open Button                     10) Vac Cotton
11) Vac Chamber            12) Heating Seal                    13) Sealing Rubber Strip   

Make sure that the weld is properly closed. A correct weld should be a smooth, straight
strip without wrinkles.

Wait 15 seconds before sealing the next bag to allow the appliance to cool down.

Fill the bag in such a way that no food residues or liquids can escape and enter the
machine during sealing.

Parts

1

2

3

4

8

9

12

13

11

6

5

7

10