Bontrager Flare R, Manual

operation

Powering on

Press and release the power button one time to turn on 
the light. The power button LED will show battery status.

Changing the mode

Each quick-press of the power button will change to the 
next mode.

Locking the mode

Select the desired mode, then press and hold the power 
button 8 seconds. The light will turn off and the main 
LED will flash once.

Unlocking the mode

Press and hold the power button 8 seconds. The light 
will turn off and the main LED will flash once. 

Powering off 

Press and hold  
the power button  
until the light  
turns off.

ImPortant

Ensure USB cover is latched before riding in the rain or 
in wet conditions. If USB cover is not closed, damage to 
the light may occur.

Charging and Charge Status

Although the Flare R is fully charged at the factory, it is 
recommended to charge it before first use. Complete 
charging takes approximately 2 hours from empty.

Flashing red:

 Actively charging.

As the battery progresses from zero charge (red) to full 
charge (green), the flashes will get progressively longer 
in duration. Green: Charging has completed

Charging LED progression

Charging

While charging via the USB port, the light will  
remain off but the status LED will flash to show  
the charging status.

ImPortant:

 Use a quality CE or UL approved USB 

charger rated for 500 mA or greater.

Main LED

Power Button

USB  

Cover

BT16_MANUAL_FlareR_USEN_FINALv5.indd   5

3/4/16   4:46 PM