PG01 Plasma Air Disinfection Robot_Product Manualv1.0.1
BooCax Technology Co.,Ltd.
1
/
26
www.boocax.com
Safety and Precautions
The use of plasma air sterilizing robot shall follow the operation instructions. Use beyond the
range is prohibited!
BooCax will not assume any responsibilities for the losses caused by improper operation .
01/ Safety instructions for the use of robots
1 ) The following acts are prohibited
1
Do not use the robot in flammable gas and similar dangerous environments；
2
Do not throw any foreign objects into the cabin；
3
Do not perform unnecessary operations such as cleaning and maintenance when the
robot is turned on；
4
Do not disassemble the robot for repair or debugging；
5
Do not touch the circuit terminals when the robot is charging；
6
Do not replace any parts. If necessary, please do so under the direction of BooCax .
2 )
Safety instructions For Use
1
The robot should be parked in a flat and solid place at normal temperature ;
2
If there is odor or abnormal noise DURING DISINFECTING, please immediately turn off
the power of robot and report it to the after-sale service ;
3
Before starting the robot, please check whether the safety components (sensor,
emergency stop switch, etc.) are in normal conditions;
4
If the floor is waterlogged and greasy, please clean the floor promptly ;
5
The robot body must be maintained by a trained professional ;
6
Before using the machine, please install the outlet grille, filter screen and inlet grille in
place;
02 / Robot Daily Maintenance Instructions
When cleaning the robot fan, please make sure that the robot is turned off, the ventilation
grille is removed, and the power supply is unplugged or away from the charging station!
Otherwise, electric shock or serious malfunction may result.
It is strictly forbidden to use tap water to directly flush the robot and charging pile, which
may cause the accumulation of water vapor or water in the device, resulting in serious and
irreparable failures.
1) Cleaning
1
Regularly use wet paper towel to clean the dust on the fan;
2
Regularly use a brush to clean the surface of the driving wheel and universal wheel of the
robot to remove foreign objects such as hair dust;
3
Gently wipe the outer surfaces of the robot regularly with detergent and a lint-free cloth;
4
Regularly contact the after-sales service for maintenance work such as oiling and
