BKS-ST-220A_Product Manual
BooCax
2
/
30
boocax.com
F
OR THE
D
ISINFECTANT
L
IQUID
•
The spray robot should be parked in a flat and solid place at normal temperature;
•
Disinfectant belongs to external use and prohibited to be taken orally
;
keep it out of the reach
of Children.
•
People who are allergic to chlorine should use it with caution. If there is allergic phenomenon,
stop using it immediately.
•
When disinfectants are used for indoor-air disinfection, they should be carried out in the
absence of anyone.
•
Incase of chemical reaction of disinfectants, it is recommended to clean the water tank with
clean water when changing different kinds of disinfectants.
•
Cannot be used for metal objects disinfection. There is a certain bleaching on fabric.
•
Users should wear latex gloves and do eye protection. If any touch happens on skin or eye,
clean it with clean water immediately. And if cause long-time discomfort, please seek for
medical advice immediately.
R
OUTINE MAINTENANCE
When performing routine maintenance, please make sure that the robot is turned off, unplugged
or away from the charging pile! Otherwise, electric shock or serious failure may occur.
It is strictly prohibited to flush the robot and charging pile directly with tap water, which may lead
to the accumulation of water vapor or water inside the equipment and cause serious irreparable
failure.
C
LEANING
1)Gently wipe the dirt inside the water tank and the ultrasonic sealing ring (the four black circles
seen after removing the water tank) with a brush and a wet cloth every week
;
2
)
Regularly brush the surface of the driving wheel and universal wheel;
3
)
Use detergent and dust-free cloth to gently wipe the outer surface of the robot regularly
;
4) Regularly contact after-sales for maintenance services such as lubrication, dust-cleaning
at the damping spring and universal wheel bearing;
5) Lidar sensor, as the expensive precision component in robot, should be wiped regularly with a
non-dust cloth. Do not wipe with force or other detergent, which may be easy to cause functional
damage
6) If the robot will not be used for a long time, store it in a dry and cool place.
C
HECK THE SCREW IS LOOSE OR NOT
Shake the components gently on a regular basis to observe whether they are loose. If there is any
abnormal sound, please check the screws at the installation position of relevant components. All
the screws of the robot have undergone anti-loosening treatment. However, for the sake of safety,
please contact "BooCax After-sales" if any screw is found loose