BKS-UVRobot_Product Manual
BooCax
16
/
23
boocax.com
black object, grid, etc.), it is suggested to carry out appropriate treatment, such as pasting
frosted sticker, gray adhesive tape, reflector, etc.;
⑥
If the working scene is too large/noise, you can use "
Incremental composition
" to
enlarge/repair the map;
⑦
When passing the QR code, stay in front for more than 1 second, and there will be a
voice
prompt
when it is successfully scanned.
5.7.
Disinfection route setting
The walking path of robot consists of charging points, path points and disinfection points.
Specific setting procedures follow the instructions of App, as shown below:
1)
Rapid deployment
➢
Charging point
: The position of the robot docking the charging pile.
Click "Deployment routes" to enter the route setting mode; push the robot to the charging
pile for docking as guided, and click Next to complete the setting.
➢
Path points and disinfection points:
deploy the points by pushing robot /dragging map
In the required position, mark the corresponding point(
The small blue icon is the
corresponding location point)
Path points
need to be set for the route that the robot passes through, such as turns
