BKS-UVRobot_Product Manual
BooCax
17
/
23
boocax.com
and gates, which must be marked (as shown in Figure 2 below: gray points are
path points).
Disinfection points
are set as required for the environmental site (as shown in Figure
3 below: purple icons are disinfection points).
“
Change
“、”Connect
"
function
：
Mainly used to connect "nearby points" in series.
“
Change
“
is to switch point, that is, changing the current point of the robot to the selected
nearby point. After this operation, you can click "Connect
" to connect the robot's previous
path point or disinfection point with the current point.
“
Point Change
”
and
“Point C
onnection
”
,
these two functions are mainly designed to facilitate route editing.
2)
Free editing-adjust path
➢
If the route by rapid deployment is not applicable, click "Free Edit" to adjust the route. The
robot supports adding/deleting/moving points, changing running route, changing disinfection
points, etc.
