BKS-ST-BF01_Product Manual v1.0.1
BooCax
25 / 32
boocax.com
Attachment: Precautions when adding disinfectant
(1) When adding disinfectant, be careful not to go past the fan outlet (remove the fog outlet
grille, both can see the internal outlet)；
(2) When adding/discharging liquid, prevent the liquid from splashing into the chassis
(3) The disinfectant is required to be legal and compliant, and it is carried out in strict
accordance with the ratio ;
(4)When the robot is working, the spray grille needs to be placed facing upward to prevent
the internal disinfection liquid jet from splashing out ；
(5) The working principle of the atomization disinfection robot is to quickly atomize the
disinfectant and automatically spray it to the disinfection area to achieve the purpose of
killing bacteria and viruses in the air and the settlement surface (depending on the
disinfectant). It is used now to avoid the attenuation of the disinfection effect due to
oxidation and volatilization.
⚠
Note:
The maximum capacity of the spray water tank is 12L. In order to avoid the overflow of
disinfectant under working conditions such as up and down ramps, entry and exit grooves,
thresholds, and emergency stops, it is recommended that the maximum amount of disinfectant
put in should not exceed 10L.
