Page
3
of
7
WARNING
WHAT’S INCLUDED
•
SB-1
•
DC12V 2A 90~240VAC Power Supply
•
User Manual
•
40” RGB LED Strip
•
25
’
USB Type A to Type B Cable
SAFETY INSTRUCTIONS
•
Do not operate this pedal at temperatures above 113
°
F
•
Only use the supplied power supply
•
Make sure the power
supply’s
cord is not pinched or damaged in any way
•
Make sure the power supply is plugged into an appropriate voltage source
•
If any defects with the pedal are discovered, please contact an authorized service technician
for assistance
1.0 INTRODUCTION
1.1 Overview
The SB-1 is a single channel RGB LED lighting controller that has been specially designed for
musicians by musicians. Housed within a traditional guitar stomp box that can be discreetly added
to any pedal board, the SB-1 offers manual lighting control directly from the stage. With a kick of the
switch, you become your own lighting designer.
With a robust yet efficient design, the SB-1 is a complete lighting controller that allows users to
manually control a variety of lighting parameters on the fly with unparalleled ease. The pedal has a
total of 8 colour settings: 7 fixed and 1 variable (which randomly cycles through all available colours).
While the brightness/intensity is adjustable for all 8 settings, the variable colour setting has an
additional parameter, which controls the rate at which the colours randomly cycle.
The pedal’s
footswitch can be operated in 2 different modes: “Momentary” and “Latched”
. All of these
parameters can be adjusted while the pedal’s footswitch is engaged or bypassed. “
Link
”
jacks,
located on either side, allow multiple SB-1 pedals to be chained together and simultaneously
controlled from a single pedal. In other words, multiple musicians can take turns controlling lighting
cues directly from their position on stage.
For your own safety, please read this manual to learn how to safely
use, store and maintain the SB-1 prior to use.
CAUTION! Please keep this pedal stored in an area with no moisture.
