Studio Electronics Boomstar Manual
56
Panels
4.2.16 Boomstar SEM Controls
4.2.16.1
Sweeps the 12dB filter setting from low-pass to high-pass.
4.2.16.2
Selects the
BAND-PASS
filter mode, passing frequencies within a
certain range and rejecting, or attenuating frequencies outside that
range. Like a bouncer at a V. I. P. entrance, but for good vibrations.
4.3 Back Panel
4.3.1 Connections and Switches and Connection Warnings
4.3.1.1
Standard high impedance output.
4.3.1.2
The MIDI
OUT
connection functions
as a thru as well. The MIDI
IN
is
self-explanatory. The
OVERFLOW
switch sets the MIDI overflow
parameters for chaining multiple Boomstar synths together (Software Rev.
2.0). The MIDI
LEARN
switch accesses settings for modwheel, aftertouch,
note priority, LFO key trigger position, tap tempo, (Software Rev. 2.0) and
MIDI channel: play on the channel desired, press the learn switch
momentarily, release and the Boomstar “learns” it until the power is
