Page:
70
OIM - Manual
Version:
2014/11
Speedlane 900
Edition:
SL900 -OIM - USA
TECHNICAL SPECIFICATIONS
15
Technical specifications
15.1 Motor
Input power:
Input power when not used: 30 Watt
Maximum input power: 350 Watt
Motor type:
3-phase asynchronous motor, 6 poles
Voltage:
3 x 240 V (triangular), 50 Hz
Power:
0.25 kW ID=25% (S3) (per unit)
Motor speed:
900 rev/min
Gearbox reduction:
15:1
Protective system:
IP 54
Temperature sensing:
135 degrees Celsius
Door wing speed:
Maximum 0.75 m/sec
Door lock:
Dead centre mechanism
15.2 Control
Microcontroller:
16 bits micro processor
Frequency inverter:
Input: 200
– 240 V AC, 50/60 Hz
Output: 200
– 240 Vmax AC, 2.5 A
Nominal motor power:
0.4 kW
15.3 Sensors
Power supply:
12-24 VDC, 100mA
Min. distance:
1m
Max. distance:
10m
Temp. range:
-20°C / +55°C
Response time:
±20ms
15.4 Complete barrier
Type:
Two-wing stainless steel access control barrier with sliding doors
Application:
Barrier that allows controlled access to authorized persons
Capacity:
Controlled access (1 direction), nominal capacity: 15 to 30
persons/minute.
Combined controlled access in 2 directions, Free entry/exit, nominal
capacity: 120 persons/min
Finish:
Stainless steel, AISI 304 with a K240 grain finishing, plating material.
Stainless steel, AISI 304 with a K240 grain finish, end column
Door wing:
Glass, 10 mm transparent, tempered
Door height:
900 mm standard (opt. 1200, 1400, 1600 or 1800 [mm])
Weight:
2x150 kg, including glass (standard version)
Installation:
Chemical anchors
Cabling:
Power supply, operating panel optional, fire alarm & communication
cables (see drawings)
Power supply:
240 VAC, 50/60 Hz
Fuse:
16 A slow
(structural)
