EN
16
Installation
www.bora.com
Installation dimensions
515
560 - 710
90
>140
222
89
900 - 1050
460
Abb. 6.9 Device dimensions with curved transition piece
30
124,50
Abb. 6.10
Offset with transition pieces
187
60
128
Abb. 6.11 Control unit installation dimensions
X
X
With surface mounting, attach the enclosed sealing
tape [2] to the underside of the device before installing
it. Do not leave any gaps.
X
X
With flush installation, attach the enclosed sealing tape
to the horizontal cutting edge in the worktop cut-out,
even if you seal the cooktop with a silicone sealant [1]
or similar.
X
X
Stick the supplied nameplate (adhesive label) to the
back of your operating and installation instructions.
6.5 Installing the extraction system
INFO
Clearance of one millimetre should be planned
between the built-in appliances.
INFO
A clearance of two millimetres should be
planned around the built-in appliances.
INFO
Cable protection (false floor) should be
mounted below the appliances. This needs to
be removable for maintenance work.
>
20
50
Abb. 6.8 Side view of the cable protection and ventilation
Q
Q
Cross bars on the kitchen unit in the area of the
worktop cut-out may need to be removed.
Q
Q
The drawers and/or shelves in the floor unit must be
removable for maintenance and cleaning purposes.
Q
Q
There must be a return flow aperture of > 500 cm² in
the plinth area for recirculation.
