58
59
EN
NL
FR
DE
1.
Timed cooking setting the cooking time (duration).
2.
Timed cooking setting the end of cooking time (stop time).
3.
Delayed cooking setting duration and stop time.
Touch the [C] in order to toggle between cooking duration (cook time) and end of
cooking time (stop time): the words “dur” or “End” are displayed respectively.
Touch [D] or [E] keys (-/+) to edit the duration or the stop time when the proper
word is displayed:
1.
When the word “
dur”
is displayed, the control shows
30’
as the standard
cooking duration. Touch [D] or [E] in order to set the actually desired cooking
time in a range between 0 and 240 minutes. As soon as the value is accepted
the display switches to clock mode. It will show the time of day, the pot symbol
and the
letter to indicate that a timed cooking is active. The end of cooking
time is updated automatically.
2.
When the word “
End”
is displayed, the control shows the current time as
the initial stop time. In order to set the actually desired end of cooking time in a
24 hours range. As soon as the value is accepted the display switches to clock
mode. It will show the time of day, the pot symbol and the
letter to indicate
that a timed cooking is active. The cooking time is updated automatically.
3.
Repeat the same operations of point 1 then touch [C] key until
End
appears. The control shows the “current time + cooking time” as the initial stop
time. It’s not possible to lower the end of cooking time below this value.
Touch [D] or [E] keys (-/+) in order to set the actually desired end of cooking
time in a 24 hours range. The display will flash
End
and its value alternatively for
a few seconds then it will show the time of day and the letter to indicate that
a delayed cooking has been programmed. As soon as the delay time expires,
the oven starts and works for the programmed cooking time. The
symbol is
displayed.
At the end of any timed activity the control shuts down the oven, the buzzer sounds
a warning sequence (two short beeps repeated every 3 seconds) to recall the user
attention, for a maximum time of 5 minutes and makes the time related icons (
,
) flash on the display.
Touch any keys to silent the buzzer and reset the warning message.
The buzzer doesn’t sound between 22:00 and 8:00 (night mode).
Touch the [H] key in order to stop any activity.
Oven functions
The control can manage many cooking functions, their number and availability
temperature starts flashing on its own display, touch [D] or [E] keys (-/+)
in order to select the desired value, in a range between a minimum and a
maximum, depending on the mode. Check the value on the temperature display.
5.
Touch the [G] key once more to confirm the selection otherwise it will be
confirmed automatically after a short time.
6.
Once the mode is selected, touch [A] key (booster) if you need to fasten the
oven preheat. Normally the food must be introduced after the end of preheat
in this case.
The oven will work until a maximum time 12hours. Depending on the oven model,
the number and type of available functions can be different.
If the selected function works using any heating elements, the
symbol is
displayed (it doesn’t appear in defrost position).
min
c
Fig.
As soon as the oven starts, the preheat bar on the temperature display turns on,
step by step, showing when the oven is at 25%, 50%, 75% and finally 100% of the
set-point. As soon as each level is reached, its step becomes steady, the next one
start flashing. All the four segments become steadily on when the preheat ends.
Fig 9c
The icon display shows the oven elements in use (heaters, working fan, turnspit)
whenever any function is active.
Touch the [H] key (On/Off) to stop any oven activity immediately. The “OFF” writing
appears on the clock display.
Setting an automatic oven function
After having selected a function as described before, the control can be programmed
in order to set timed cooking activities. The time program remains active even if
the function is changed (exception: pyrolyse). The following options are available:
