60
61
EN
NL
FR
DE
The door remains locked until the oven temperature drops below the safety
threshold, at this time the control unlocks the door.
The cooling fan starts as soon as the function is selected and turns to its higher
speed when the inner parts get hot. The oven temperature is automatically set to
475°C in order to perfectly clean the cavity.
min
c
Fig 9d
The control also locks immediately the door in order to guarantee the user safety,
given that the temperature inside gets very hot. A lock icon on the temperature
display shows the status of the latch mechanism at any time:
Door unlocked, lock symbol off.
Door locked, lock symbol always on.
Latch moving, transition in progress, lock symbol flashing.
eco-Pyrolyse
When this function is active, the writing “Eco” flashes every 5 seconds on the
temperature display. The standard time is 1h:30min and can never be changed,
the clock display shows P1:30. It is used in case a light cleaning action is requested.
door and commands lock for children safety (pyro)
This is an additional safety functions. The door latch mechanism, managed
automatically during pyrolyse can be actuated manually by the user in order to lock
the oven door and prevent children from having free access to the oven.
Hold
and
keys simultaneously for about 3 seconds to lock/unlock the door
manually. Also the keyboard is disabled while this function is actuated: the display
shows a key on the clock display in case of any attempt to touch inactive keys.
Buzzer volume
The buzzer volume can be set, when the control is in stand-by mode, touching first
the [B] key until the writing “L1”, ”L2” or ”L3” is displayed (depending on the set
volume) then touching the [D]/[E] key. At any touch the buzzer sounds a double
beep, selecting the volume out of three available levels.
depends on the oven model. The temperature range is between 75°C and 250°C
for most functions. Preset temperatures are mainly 190°C for convection modes,
210°C for thermal modes and 230°C for grill functions.
Exceptions are Eco-Bake (preset=190°C), Pyrolyse (fixed 475°C), and warming
mode which range is between 50°C and 120°C.
Booster (Fast Preheat)
This function allows to fasten the oven preheating, saving time. When the oven
temperature reaches the set-point a continuous acoustic warning signal, about 5
seconds long, recall the attention of the user. Fast Preheat is not available in Grill,
Pyrolyse, Eco-Bake, Keep Warm and Defrost. Touch [A] key to enable the function,
the writing “Prh” appears on the clock display, the “°C” symbol on the temperature
display flashes until the oven reaches the set temperature.
eco-Bake
This function is defined in order to obtain a consistent energy saving. The cooling
fan is initially off and turns on only when the inner parts temperature gets high,
then it works with the heating elements. Cooking might be a little bit slower than
the standard Bake, especially when the oven is heavily loaded. When this function
is active, the writing “Eco” flashes every 5 seconds on the temperature display.
defrost
This function is used to defrost frozen food in a short time. It doesn’t heat up
the oven, only the convection fan works. The temperature display shows
dEF
to
indicate that this special mode is active.
Pyrolyse (Self-Clean)
Select the proper program to start a cleaning cycle. The temperature display show
the writing
-P-
and the icon display shows the elements in use. The clock display
starts showing “Pyro” for a few seconds.
The clean time can be set according to the same rules of the automatic functions,
and therefore the pyrolitic cycle can be delayed.
The maximum allowed clean time is 3 hours, the minimum 1 hour. The standard
time is 1h:30min, the clock display shows
P1:30
. At the end of the self-cleaning
activity the display shows “---“ steady and
flashing as long as the oven is cooling
and the door remains locked. Once the oven is cool enough, the door unlocks and
the display shows “
end
”.
Touch [H] key in any moment to stop the oven.
