Unpack CO2 Regulator and fit
elbow fitting to spigot outlet.
Attach the regulator to the
disposable CO2 bottle, ensuring
the pressure relief vent is facing
away from you. Ensure the
regulator is closed.
Stand the cylinder in a suitable
place.
Allow the machine to stand for
8 - 12 minutes for the initial chilling
process to complete.
It is necessary to prime the
sparkling system - pull the sparkling
handle for a few seconds until
CO2 is coming through. Check
and adjust the CO2 pressure
accordingly.
Connect the assembled CO2
bottle and regulator to the CO2
inlet using a ¼” pipe.
We recommend between 3.5 - 4
bar (58 PSI) (max). Do not exceed
4 bar pressure.
58 PSI
CO2 Bottle Installation - Sparkling Versions Only
1
2
3
4
7
5
6
10
mins
OFF
