background image

 

620 16

th

 Street  #300, Denver Colorado 80202                                                                                               720-961-4056    

www.borgdisplays.com

            

   BORG DISPLAYS

Click on “Enable Button2” checkbox to enable/disable Button2, when activated, press button2 will bring a 
Microsoft on-screen-keyboard (OSK) to a specific location on screen.  You can turn OSK off by pressing 
button2 again.  9 different default locations can be selected for the OSK. 

 

Button 3 

 

Click on “Enable Button3” checkbox to enable/disable Button3, when activated, press button3 will launch an 
Internet Explorer Window and navigate to the page you assigned.  Check the “KIOSK Mode” if you want this 
IE window to be a full-screen (without toolbar and menu).  

Navigating in kiosk mode: 

Simply connect a USB 

keyboard and hit CTRL+ESC to get the START menu then navigate either via USB mouse or UP/DN arrows 
or TAB and ENTER on keyboard. Press button3 again will close the IE window that we opened earlier. Check 
the “Specific URL”, and enter your assigned web page at the text bar below, then the IE will browse to your 
assigned page when “Homepage Button” is pressed.  

 

                                                                

 

Click on “Enable Button4” checkbox to enable/disable Button4, when activated, pressing button 4 can 
shutdown, reboot immediately or act as a Hot Key from the table below. This can be VERY useful to 
navigate between multiple full screen applications (Alt+Tab), etc (see table below).  

WARNING:

 Button 4 

has a dual mode whereby a single press activates the command configured above 

and pressing and 

holding for 4 seconds will turn off the power

 

Button 4 setting (Power or Hot 
Key Button) 

Summary of Contents for Protege














Reviews: