EN
WWW.BORMANNTOOLS.COM
5
Maintenance and Cleaning
WARNING:
Before any work on the machine itself, pull the mains plug.
For safe and proper working, always keep the machine and the ventilation slots clean.
Clean the tool mount daily.
Replacing the Dust Protection Cap
Damaged dust protection caps should be replaced as possible since dust that enters the tool holder can cause malfunctions.
Pull back and hold the locking sleeve pull off the dust cap with a suitable tool.
With the locking sleeve pulled back, pull on the new dust cap until it sits firmly over the tool holder and the locking sleeve can again be slid forward.
If the machine should happen to fail despite the care taken in manufacture and testing, repair should be carried out by an authorised customer services agent
for Bormann power tools.
Recycle raw materials instead of disposing as waste.
Machine, accessories and packaging should be sorted for environment-friendly recycling.
The plastic components are labelled for categorized recycling.
Environmental Protection
