6 |
P a g e
Clean the smoker each time after using it. Unplug both the generator and the smoking chamber.
Clean the smoker using water and washing-up liquid. The inside of the smoker will have black residue
on its walls. Do not try to remove it by scrubbing or using caustic detergents. If there is grease
residue on the surface of the smoker wipe it with a damp cloth. The generator separating screen and
the tray which collects dripping fat and ash need to be kept clean, as excess fat may cause
combustion.
Note!
While smoking very fat products control the amount of fat gathering on the screen. Excess fat
must be immediately removed.
Note!
While working, the feeder of the smoker collects carbon deposit which needs to be removed
after 8 hours of generator's work with a scrubbing brush, pliers or another blunt tool.
•
the inlet for inserting working part must have 100mm in diameter
•
the attachment must be fixed to the wall permanently and made in such a way that it will keep
the generator from moving
•
the maximum distance between he attachment and the axis of the inlet for the working part must
not exceed 177mm
•
the chamber's smoke outlet must be located above the smoke generator
•
the chamber must ensure protection of the generator's heating element (burner) against water,
fat and other substances which may drip on it when in use
•
the chamber must ensure fire protection against smouldering particles of wood chips falling on
top of the burner
otwór na wprowadzenie
cz
ęści roboczej
zaczep do monta
żu
generatora dymu
os
łona grzałki
VIII. CLEANING
IX.
INSTALLING A SMOKE GENERATOR IN AN DIFFERENT CHAMBER
attachment for attaching
smoke generator
burner casing
inlet for inserting
working part
