11
support@borrowedspaces.com
PRODUCT NUMBER:
YM11762
CARTON I.D. STAMP: __ __ __ __ __ ___ (Box 1)
CARTON I.D. STAMP: __ __ __ __ __ ___ (Box 2)
CARTON I.D. STAMP: __ __ __ __ __ ___ (Box 3)
STOP
STOP
STOP
STOP
1-833-455-9002
support@borrowedspaces.com
C.
Read the assembly manual completely, paying special attention to ANSI warnings;
notes; and safety/maintenance information on pages 1 - 4.
•
Follow the instructions in order.
•
This structure is designed to be assembled and installed ideally by four people,
DO NOT attempt to install alone.
• Consider the slope of elevation where you plan to install the structure. Also, check for
gas, telephone, other utilities or sprinkler line locations prior to excavating any holes.
D.
Before you discard your cartons fill out the form below.
• The carton I.D. stamp is located on the end of each carton.
• Please retain this information for future reference. You will need this information if you
contact the Consumer Relations Department.
• Each step indicates which bolts and/or screws you will need for assembly, as well as
any flat washers, lock washers, t-nuts or lock nuts.
A.
This is the time for you to inventory all your hardware, wood and accessories,
referencing the parts identification sheets. This will assist you with your assembly.
Step 1: Inventory Parts - Read This Before Starting Assembly
B.
If there are any missing or damaged pieces or you need assistance with
assembly please contact the consumer relations department directly. Call us
before going back to the store.
