Bort 93410181, Manual

6

Belt sander

Intended Use

The machine is intended for dry sanding of wood, 

plastic, filler and coated surfaces .

Technical specifications (fig. 1)
Product elements (fig. 2)

1 .  Wheel for maximum speed control

2 .  Clamp Hole

3 .  Switch locking button

4 .  On/Off switch

5 .  Dust extraction outlet

6 .  Knob for adjusting belt centering

7 .  Sanding belt

8 .  Tension lever

The complete set includes:

1 .  Sanding belt

2 .  Dust bag

3 .  Сlamp

GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions .

Failure to follow the warnings and instructions may 

result in electric shock, fire and/or serious injury .

Save all warnings and instructions for future refer-

ence .

The term “power tool” in the warnings refers to your 

mainsoperated (corded) power tool or battery-op-

erated (cordless) power tool .

Work area safety

•  Keep work area clean and well lit . Cluttered or 

dark areas invite accidents .

•  Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable 

liquids, gases or dust . Power tools create sparks 

which may ignite the dust or fumes .

•  Keep children and bystanders away while operat-

ing a power tool . Distractions can cause you to 

lose control .

Electrical safety

•  Power tool plugs must match the outlet . Never 

modify the plug in any way . Do not use any adapt-

er plugs with earthed (grounded) power tools . 

Unmodified plugs and matching outlets will re-

duce risk of electric shock .

•  Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges and re-

frigerators . There is an increased risk of electric 

shock if your body is earthed or grounded .

•  Do not expose power tools to rain or wet condi-

English

tions . Water entering a power tool will increase 

the risk of electric shock .

•  Do not abuse the cord . Never use the cord for car-

rying, pulling or unplugging the power tool . Keep 

cord away from heat, oil, sharp edges and moving 

parts . Damaged or entangled cords increase the 

risk of electric shock .

•  When operating a power tool outdoors, use an 

extension cord suitable for outdoor use . Use of a 

cord suitable for outdoor use reduces the risk of 

electric shock .

•  If operating a power tool in a damp location is 

unavoidable, use a residual current device (RCD) 

protected supply . Use of an RCD reduces the risk 

of electric shock .

Personal safety

•  Stay alert, watch what you are doing and use com-

mon sense when operating a power tool . Do not 

use a power tool while you are tired or under the 

influence of drugs, alcohol or medication . A mo-

ment of inattention while operating power tools 

may result in serious personal injury .

•  Use personal protective equipment . Always wear 

eye protection . Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will re-

duce personal injuries .

•  Prevent unintentional starting . Ensure the switch 

is in the off-position before connecting to power 

source and/or battery pack, picking up or carrying 

the tool . Carrying power tools with your finger on 

the switch or energising power tools that have the 

switch on invites accidents .

•  Remove any adjusting key or wrench before turn-

ing the power tool on . A wrench or a key left at-

tached to a rotating part of the power tool may 

result in personal injury .

•  Do not overreach . Keep proper footing and bal-

ance at all times . This enables better control of the 

power tool in unexpected situations .

•  Dress properly . Do not wear loose clothing or jew-

ellery . Keep your hair, clothing and gloves away 

from moving parts . Loose clothes, jewellery or 

long hair can be caught in moving parts .

•  If devices are provided for the connection of dust 

extraction and collection facilities, ensure these 

are connected and properly used . Use of dust col-

lection can reduce dust-related hazards .

Power tool use and care

•  Do not force the power tool . Use the correct pow-

er tool for your application . The correct power 

tool will do the job better and safer at the rate for 

which it was designed .

•  Do not use the power tool if the switch does not