Bort 93410587, Manual

9

needs (1);

•  Unfold the hanger, install the hanger at the of the tele-

scopic pole . (2);

•  Insert the pole to the ironing support fixing bush (3);
•  Insert the telescopic pole to pole interface, locked by a 

screw (4);

•  Insert steam pipe into steaming pipe interface, rotate 

along clockwise direction till it is tightly screwed (5);

•  Loss up the top buckles of ironing support, then fixed it 

at the bottom of the hanger, fix the down buckles to the 
ironing support fixing bush, lock it (6);

•  Take out water tank, open the lid, fill clean water into the 

tank . Note: Only cold water can be filled . Do not use hot 
water . To prolong garment steamers service life, purifier 
water is preferred (7);

•  Place water tank to its original position after the tank is 

filled with water (8);

•  Insert power line to the ac 220V-240V socket (9);
•  Turn on rotary switch, garment steamer will begin 

start work . (10) The switch have 4 level power, you can 
choose the steam which you like: 

1 . Disinfection; 2 . Chemical fiber polyester; 3 . Cotton 
linen or light clothes; 4 . Fur or heavy overcoat . 

•  The most ideal method to remove wrinkles requires the 

steam is strong enough to go through the fabric and 
make it soft and then dry it immediately . This appliance 
has been designed to achieve this method;

•  Both press ironing and vertical iron are available with 

the appliance . When doing press iron, place the fabric 
on the ironing support, hold the steam head with the 
head contacting the fabric, slight push the steam button 
to release the steam . Then iron it without steam;

•  Ware anti scald gloves when doing the ironing . Hand 

the fabric on the hanger, hold the fabric by left hand 
to keep the fabric still and make the fabric flat with a 
force of slight pilling . Hold the steam head by right hand 
with the head contacting the fabric, move slowly up and 
down . Left and right;

•  A steam defender can be used to iron the fabric which is 

sensitive to the temperature to avoid the direct contact 
from steam head . For install: push the steam defender to 
a proper position to have it installed;

•  A brush can be used to iron the woolens, the proper 

ironing distance is 2-3 cm .

ATTENTION: We recommend using only dis-
tilled water!

MAINTENANCE AND CARE

WARNING!

Always disconnect the mains plug and allow 
the steam cleaner to cool down before per-

forming any maintenance work .

TROUBLESHOOTING

•  Often, failures have simple causes and you can do the 

troubleshooting yourself using the following overview . 
If you are in doubt or if the failure is not listed here 
please contact the authorized customer service .

•  Repair works may only be performed by the authorized 

customer service . Always disconnect the mains plug 
and allow the steam cleaner to cool down before per-
forming any maintenance work .

ENVIRONMENTAL PROTECTION

The packaging material can be recycled . Please do not 
place the packaging into the ordinary refuse for disposal, 
but arrange for the proper recycling .

DISPOSAL

Discarded electric appliances are recyclable and 
should not be discarded in the domestic waste! 
Please actively support us in conserving resources 
and protecting the environment by returning this 

appliance to the collection centres (if available) .

Made in China .