Bort 93410815, Manual

5

Geräusch-/Vibrationsinformation

Gemessen gemäß EN 60745-2-11 beträgt der Schalldruck-

pegel dieses Gerätes 89 dB(A) und der Schalleistungspegel 

101,1 dB(A) (Standard- abweichung: 3 dB), und die Vibrati-

on 7,9 m/s

2

 (Hand-Arm Methode) .

Konformitätserklärung  

Wir erklären in alleiniger Verantwortung, daß dieses 

Produkt mit den folgenden Normen oder normativen 

Dokumenten übereinstimmt: EN 60745-1, EN 55014-1, 

EN 55014-2, EN 61000-3-2, EN 61000-3-3, gemäß den Be-

stimmungen der Richtlinien 2006/42/EG, 2006/95/EG, 

2004/108/EG, 2011/65/EU .

Air blower

Intended Use

The product is indented for blowing leaves, garden waste 

such as grass, twigs and pine needles .

Technical specifications (fig. 1)
Product elements (fig. 2)

1 . On/Off switch with speed control

2 . Switch locking button

3 . Wheel for adjusting speed

GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions .

Failure to follow the warnings and instructions may result 

in electric shock, fire and/or serious injury .

Save all warnings and instructions for future reference .

The term “power tool” in the warnings refers to your main-

soperated (corded) power tool or battery-operated (cord-

less) power tool .

Work area safety

•  Keep work area clean and well lit . Cluttered or dark areas 

invite accidents .

•  Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases or 

dust . Power tools create sparks which may ignite the dust 

or fumes .

•  Keep children and bystanders away while operating a 

power tool . Distractions can cause you to lose control .

Electrical safety

•  Power tool plugs must match the outlet . Never modify 

the plug in any way . Do not use any adapter plugs with 

earthed (grounded) power tools . Unmodified plugs and 

matching outlets will reduce risk of electric shock .

•  Avoid body contact with earthed or grounded surfaces, 

such as pipes, radiators, ranges and refrigerators . There is 

an increased risk of electric shock if your body is earthed 

or grounded .

•  Do not expose power tools to rain or wet conditions . Wa-

ter entering a power tool will increase the risk of electric 

shock .

•  Do not abuse the cord . Never use the cord for carrying, 

pulling or unplugging the power tool . Keep cord away 

from heat, oil, sharp edges and moving parts . Damaged 

or entangled cords increase the risk of electric shock .

•  When operating a power tool outdoors, use an extension 

cord suitable for outdoor use . Use of a cord suitable for 

outdoor use reduces the risk of electric shock .

•  If operating a power tool in a damp location is unavoida-

ble, use a residual current device (RCD) protected supply . 

Use of an RCD reduces the risk of electric shock .

Personal safety

•  Stay alert, watch what you are doing and use common 

sense when operating a power tool . Do not use a power 

English