Bort 93410815, Manual

6

tool while you are tired or under the influence of drugs, 

alcohol or medication . A moment of inattention while 

operating power tools may result in serious personal 

injury .

•  Use personal protective equipment . Always wear eye 

protection . Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection 

used for appropriate conditions will reduce personal in-

juries .

•  Prevent unintentional starting . Ensure the switch is in 

the off-position before connecting to power source and/

or battery pack, picking up or carrying the tool . Carrying 

power tools with your finger on the switch or energising 

power tools that have the switch on invites accidents .

•  Remove any adjusting key or wrench before turning the 

power tool on . A wrench or a key left attached to a rotat-

ing part of the power tool may result in personal injury .

•  Do not overreach . Keep proper footing and balance at 

all times . This enables better control of the power tool in 

unexpected situations .

•  Dress properly . Do not wear loose clothing or jewellery . 

Keep your hair, clothing and gloves away from moving 

parts . Loose clothes, jewellery or long hair can be caught 

in moving parts .

•  If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected 

and properly used . Use of dust collection can reduce 

dust-related hazards .

Power tool use and care

•  Do not force the power tool . Use the correct power tool 

for your application . The correct power tool will do the 

job better and safer at the rate for which it was designed .

•  Do not use the power tool if the switch does not turn it 

on and off . Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired .

•  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any ad-

justments, changing accessories, or storing power tools . 

Such preventive safety measures reduce the risk of start-

ing the power tool accidentally .

•  Store idle power tools out of the reach of children and do 

not allow persons unfamiliar with the power tool or these 

instructions to operate the power tool . Power tools are 

dangerous in the hands of untrained users .

•  Maintain power tools . Check for misalignment or binding 

of moving parts, breakage of parts and any other condi-

tion that may affect the power tool’s operation . If dam-

aged, have the power tool repaired before use . Many 

accidents are caused by poorly maintained power tools .

•  Keep cutting tools sharp and clean . Properly maintained 

cutting tools with sharp cutting edges are less likely to 

bind and are easier to control .

•  Use the power tool, accessories and tool bits etc . in ac-

cordance with these instructions, taking into account the 

working conditions and the work to be performed . Use 

of the power tool for operations different from those in-

tended could result in a hazardous situation .

Service

Have your power tool serviced by a qualified repair person 

using only identical replacement parts . This will ensure that 

the safety of the power tool is maintained .

SAFETY WARNINGS FOR AIR BLOWERS

•  Never allow children or people unfamiliar with these 

instructions to use the machine . Local regulations may 

restrict the age of the operator . When not in use store the 

machine out of reach of children .

•  This machine is not intended for use by persons (includ-

ing children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concern-

ing use of the machine by a person responsible for their 

safety . Children should be supervised to ensure that they 

do not play with the machine .

•  The operator or user is responsible for accidents or dam-

age that occur to people or property .

•  Other persons and animals should remain at a distance 

of 3metres or more when the machine is being used . The 

operator is responsible for third persons in the working 

area .

•  Never operate the machine while people, especially chil-

dren or pets, are nearby .

•  Use the machine only in daylight or good artificial light .

•  Do not operate the machine when barefoot or wearing 

open sandals, always wear substantial footwear and long 

trousers .

•  Failure to keep loose clothing from being drawn into air 

intake could result in personal injury .

•  Do not operate without tubes in place .

•  Failure to keep long hair away from the air inlet could re-

sult in personal injury .

•  Always be sure of your footing on slopes .

•  Keep all cooling air inlets clear of debris .

•  Never blow debris in the direction of bystanders .

•  Do not modify this product . Unauthorized modifications 

may impair the safety of your product and may result in 

increased noise and vibration .

MAINTENANCE AND CLEANING

Make sure that the machine is not live when carrying 

out maintenance work on the motor .

•  Regularly clean the machine housing with a soft cloth, 

preferably after each use . Keep the ventilation slots free 

from dust and dirt .If the dirt does not come off use a soft 

cloth moistened with soapy water . Never use solvents 

such as petrol, alcohol, ammonia water, etc . These sol-

vents may damage the plastic parts .

•  The machine requires no additional lubrication .

•  Should a fault occur, e .g . after wear of a part, please con-

tact your local BORT GLOBAL LIMITED dealer .

DISPOSAL

Discarded electric appliances are recyclable and 

should not be discarded in the domestic waste! 

Please actively support us in conserving resources 

and protecting the environment by returning this 

appliance to the collection centres (if available) .

In order to prevent the machine from damage during 

transport, it is delivered in a sturdy packaging . Most of the 

packaging materials can be recycled . Take these materials 

to the appropriate recycling locations . Take your unwanted 

machines to your local BORT GLOBAL LIMITED dealer . Here 

they will be disposed of in an environmentally safe way .