Bort 93728076, User Manual

7

GB

•  In case of electrical or mechanical malfunction, 

immediately switch off the tool and disconnect the 
plug

•  In case of current interruption or when the plug is 

accidentally pulled out, unlock the on/off switch im-
mediately and put it in the OFF-position in order to 
prevent uncontrolled restarting

•  Do not apply so much pressure on the tool that it 

comes to a standstill

AFTER USE

•  Before you put down the tool, switch off the motor 

and ensure that all moving parts have come to a 
complete standstill

•  After switching off the tool, never stop the rotation of 

the accessory by a lateral force applied against it

WHEN CONNECTING NEW 3-PIN PLUG 
(U.K. ONLY):

•  Do not connect the blue (= neutral) or brown (= live) 

wire in the cord of this tool to the earth terminal of 
the plug

•  If for any reason the old plug is cut off the cord of 

this tool, it must be disposed of safely and not left 
unattended

Your machine is double insulated in accordance with  
EN 50144; therefore no earthwire is required.

MAINTENANCE

Make sure that the machine is not live when carrying 
out maintenance work on the motor. 

Regularly clean the machine housing with a soft cloth, 
preferably after each use. Keep the ventilation slots 
free from dust and dirt.If the dirt does not come off use 
a soft cloth moistened with soapy water. Never use 
solvents such as petrol, alcohol, ammonia water, etc. 
These solvents may damage the plastic parts.
The machine requires no additional lubrication.
Should a fault occur, e.g. after wear of a part, please 
contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during 
transport, it is delivered in a sturdy packaging. Most of 
the packaging materials can be recycled. Take these 
materials to the appropriate recycling locations. Take 
your unwanted machines to your local SBM Group 
dealer. Here they will be disposed of in an environmen-
tally safe way.

7

English

Angle polisher

TECHNICAL SPECIFICATIONS   

 1 

PRODUCT ELEMENTS   

 2 

1.

 Spindle-lock button

2.

 Auxiliary handle

3.

  On/off locking switch

4. 

Switch locking knob 

5.

  Speed adjustment wheel

SAFETY

WARNING!  Read all instructions. Failure to follow all 
instructions listed below may result in electric shock, 

fi

 re and/or serious injury. 

•  This tool should not be used by people under the 

age of 16 years

•  Always disconnect plug from power source before 

making any adjustment or changing any accessory

ACCESSORIES

•  Use the original SBM Group accessories which can 

be obtained from your SBM Group dealer

•  For mounting/using non- SBM Group accessories 

observe the instructions of the manufacturer con-
cerned

•  Use only accessories with an allowable speed 

matching at least the highest no-load speed of the 
tool

OUTDOOR USE

•  Connect the tool via a fault current (FI) circuit break-

er with a triggering current of 30 mA maximum

•  Only use an extension cord which is intended for 

outdoor use and equipped with a splashproof cou-
pling-socket

BEFORE USE

•  Before using the tool for the 

fi

 rst time, it is  recom-

mended to receive practical information

•  Use completely unrolled and safe extension cords 

with a capacity of 16 Amps (UK 13 Amps)

•  Wear protective glasses and gloves, hearing protec-

tion and sturdy shoes; when necessary, also wear 
an apron

•  Be sure tool is switched off when plugging in

DURING USE

•  Always keep the cord away from moving parts of the 

tool; direct the cord to the rear, away from the tool

•  If the cord is damaged or cut through while working, 

do not touch the cord, but immediately disconnect 
the plug; never use the tool with a damaged cord

•  Push spindle-lock button only when spindle is at a 

standstill

•  Keep hands away from rotating accessories