Strap lock
If dynamics from spring tension elements are not to be applied in the acute phase, in the conservative
and postoperative phase (temporary), the
strap lock
can be placed in the two strap connectors of the
individual straps.
By integrating the
strap lock
in all three tension straps, the BORT DynamicFX Back Brace fixes the lumbar
and thoracic spine when the abdominal section and shoulder straps are correctly closed.
Insertion / replacement of the spring tension elements:
All spring tension elements are labelled by colour based upon their spring constants:
30 Newton
➡
yellow 40 Newton
➡
white 50 Newton
➡
blue
60 Newton
➡
red
80 Newton
➡
black
To replace the spring elements, detach the press stud closure of the spring pro
tective pockets and push them upwards.
Open the Allen screws on both of the belt connectors using the supplied Allen
key and replace the spring tension elements if required. Retighten the Allen
screw afterwards.
Now pull the spring protection pockets back down and reclose the press stud
closure on the base back plate.
All 3 belts of the BORT DynamicFX Back brace should be equipped with the
same spring strength.
Applying the body section:
Before applying the base support, remove it from the base plate by detaching
the Velcro. Position the base support together with the bottom edge of the back
section level with the natal cleft.
The patient now closes the base support at the front.
10
