10
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
Step2: Start the browser. In the address bar, enter the default IP address of the camera:
Step3: If the camera
’
s firmware version is lower than V4x.7.1.69, it will directly display the login
page, enter the user name and password when the LOGIN page appears;
Default user name:
admin
Default password:
123456
If the camera
’
s firmware version is V4x.7.1.69 or above, you need to set the password first
when using it for the first time. And you can also set three security questions for your device
after activation. Then, you can log in the device with the username(admin) and a custom
password.
Note:
(1)
Password must be 8 to 32 characters long, contain at least one number and one letter.
(2)
You
can click the “forget password” in
login page to reset the password by answering three security
questions when you forget the password, if you set the security questions in advance.
Step4: After login, please select “Configuration”
→
“Basic Settings”
→
“Network”
→
“TCP/IP”. The
Network Settings page appears (Shown as following Figure);
Step5: Change the IP address or other network values. Then click “Save” button;
Step6: The change of default IP address is completed.
