23
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
Enhancement
Table 4-4-3 Description of the buttons
Parameters
Function Introduction
IR Balance Mode
There is an option to turn On/Off the IR LED.
IR Balance Mode would avoid the problem of overexposure and darkness, and
the IR LED will change according to the actual illumination.
White Balance
To restore white objects, removed color distortion caused by the light of the
environment
Auto White Balance:
This option will automatically enable the White Balance
function
Manual White Balance:
This option is only for H.265 series. Set Red Gain Level
and Blue Gain Level manually.
Incandescent Lamp:
Select this option when light is similar with incandescent
lamp
Warm Light Lamp:
Select this option when light is similar with warm light lamp
Natural Light
: Select this option when there is no other light but natural light
Fluorescent Lamp:
Select this option when light is similar with Fluorescent
Lamp
Schedule mode:
Select this option that you can customize the schedule to
enable/disable above modes
Reduce Motion Blur
Enable this function to reduce the motion blur of objects effectively.
You can adjust the deblur level from 1 to 100.
Defog Mode
Better image effect in foggy weather, refers to Figure 4-4-10
Digital Image Stabilisation
Decrease the blur and shakiness of the image.
Exposure Mode
Auto Mode, Manual Mode and Schedule Mode are available.
Auto Mode:
The camera will adjust the brightness according to the light
environment automatically;
Manual Mode:
The camera will adjust the brightness according to the value
you set, you can set the exposure time from 1~1/100000
s, t
he higher the value
is, the brighter the image is;
Schedule Mode:
You can customize the schedule to enable/disable Auto Mode
and Manual Mode.
