01
04
02
05
03
06
02
04
06
08
V1.0
RD2
Remote Control Holder
Tripod Connector
Mainframe
Antenna
Manual
AV Out /AV In Cable
Power Adapter Cable
Port of Charging/
Power Supply
Video Output of R1 Receiver
Video Output of R2 Receiver
Video Input
Video Output (Automatically)
RP-SMA
Connection Point of Holder
Video Switch/
Automatic searching
Power On/Off
Volume Adjustment
Charging Indicator
Work LED Indicator of R1 Receiver
Work LED Indicator of R2 Receiver
Loudspeaker
Frequency Adjustment Switch
of R2 Receiver
Frequency Adjustment Switch
of R1 Receiver
Contents
Operation manual
RP-SMA:
Connect directional or omni-directional antennas
Connection Point of Holder:
Connect Remote Control Holder or Tripod Connector
Power Switch:
Power on / off
Frequency Adjustment Switch of R1 Receiver:
Adjust channel of R1 receiver
Frequency Adjustment Switch of R2 receiver:
Adjust channel of R2 receiver
Loudspeaker:
Extroverted loudspeaker
Volume Adjustment Knob:
Adjust volume of loudspeaker
Work LED Indicator of R2 Receiver:
Indicator light when R2 receiver works
Work LED Indicator of R1 Receiver:
Indicator light when R1 receiver works
Power Indicator:
Red light on when charging, Green light on when full power.
Port of Charging/Power Supply:
12V Charging/Power supply
Video Switch:
different channels on two receivers, video can be switched
Video Output:
select video output automatically
Video Output of R1 Receiver:
R1 video output
Video Output of R2 Receiver:
R2 video output
Video Input:
input the external video, the receiver no work
Dual Receiver Monitor
Thank you for purchasing this product. Please read this manual carefully before use.
I. Graphic Instruction
II. Packing Contents
III. Graphic Installation
IV. Operation
I
、
Instructions diagram
II
、
Package
