22
Error messages
Error
code
Cause
Solution
0:00
The time switches to 0:00
when batteries are replaced
The device must be
reprogrammed
E03
E90
Zero point cannot be aligned Deflate cuff completely.
E04
Batteries flat
Charge or replace
batteries.
E05
Leak
Remove cuff from device
and reconnect. Contact
your distributor if the error
occurs repeatedly.
E06
Pressure above 299 mmHg
The arm must be kept still
while the reading is being
taken.
E07
Operator has interrupted the
reading using the START/
STOP button
E08
E10
No oscillations, or no
measurable oscillations
The arm must be kept still
while the reading is being
taken.
E09
Activity sensor error
Remove and reinsert
batteries