14
Notified body:
ECS European Certification Service GmbH
Hüttfeldstraße 50
73430 Aalen, Germany
Identification number: 1883
EU declaration of conformity: http://sanitas-online.de/web/de/landingpages/cedeclarationofconformity.php
7. Changing the infrared lamp
The device must be switched off and allowed to cool and the mains plug pulled out before cleaning and chan-
ging the infrared heat lamp.
Please note that only infrared lamps of the original type may be used as replacements.
Replacement infrared lamp (type)
:
Specifications
:
Item number:
Infrared PAR 38 (150 W)
230V ~ 50 Hz
616.51
Warning
• Do not touch the infrared lamp or unscrew it when it is connected to the mains.
• Unplug the device, to avoid the risk of electrocution.
• In the interest of environmental protection, do not dispose of the device in household waste.
8. Cleaning and care of the unit
The unit should be cleaned occasionally.
Important
To avoid odours caused by fluff and dust, we recommend regularly cleaning the device as follows:
• The device must be switched off and allowed to cool and the mains plug pulled out before cleaning and
changing the infrared heat lamp.
• Ensure that no water penetrates inside the unit!
• Do not wash the unit in a washing machine!
Clean using a damp cloth, to which you can apply a little detergent if necessary.
• Do not use abrasive detergents and never immerse the unit in water. Do not touch the unit with wet hands
while it is plugged in; do not allow any water to be sprayed onto the unit.
• The unit must be operated only when it is completely dry.
9. Disposal
For environmental reasons, do not dispose of the device in the household waste at the end of its useful life.
Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please
contact the local authorities responsible for waste disposal.
10. Technical specifications
Mains connection
220-230 V~ / 50-60 Hz
Power consumption
150 W
Max. radiation intensity
550 W/m
2
at distance of 80 cm
Dimensions (W x H x D)
145 x 220 x 175 mm
Weight
approx. 800 g
Operating conditions
Temperature: +5°C to +35°C; Relative humidity: 15%-93%
Storage and transport
Temperature: -25°C to +70°C; Relative humidity: ≤93%
Expected operating life of the device
7 years
Standby consumption
< 0.5 watts
Subject to technical modifications. The serial number is located on the device or in the battery compartment.
