38
| English
0 276 001 XXX | (17.1.11)
Bosch ebike Systems
Product Description and
Specifications
Technical Data
Product Features (see page 6–7)
The numbering of the product features refers to
the illustration of the battery charger on the
graphics page.
12
Rear rack battery
13
Battery charge control indicator
18
Standard battery
21
Battery charger
22
Ventilation openings
23
Charger socket
24
Mains voltage selector switch
25
Charger plug
26
Safety warnings, charger
27
Button for charge operation
28
Operation indicator
29
Charge connector
30
Socket for charge connector
Operation
f
Place the battery only on clean surfaces.
In
particular, avoid contaminating the charge
socket and the contacts, e.g. by means of
sand or ground.
Initial Operation
Connecting the Charger (see figures E–F)
Set the voltage of your power source on the
mains voltage selector switch
24
of the charger.
You can select between 115 V and 230 V.
f
Observe the mains voltage!
The voltage of
the power supply must correspond with the
data given on the nameplate of the battery
charger. Battery chargers marked with 230 V
can also be operated with 220 V.
Then, insert the charger plug
25
of the power
cord into the charger socket
23
of the charger.
Connect the mains cable to the mains supply.
The operation indicator
28
on the charger lights
up.
f
Do not connect the charger to the mains
supply until after the correct mains voltage
has been set on the mains voltage selector
switch 24.
Otherwise, the charger can be-
come damaged.
Switch the battery off and remove it from the
holder of the eBike. For this, read and observe
the operating instructions of the battery.
Insert the charge connector
29
of the battery
charger into the socket
30
on the battery. The
operation indicator
28
on the charger flashes.
Battery Charger
Charger
Article number
0 275 007 900
Rated voltage
V
115/230
Frequency
Hz
50/60
Battery charging
voltage
V=
36
Charging current
– Rapid-charging
operation
– Silent-charging
operation
A
A
4
1
Allowable charging
temperature range
°C
0...+40
Charge duration (for
8 Ah battery capacity)
approx.
– Rapid-charging
operation
– Silent-charging
operation
h
h
2.5
8
Number of battery
cells
10–80
Weight according to
EPTA-Procedure
01/2003
kg
0.8
Protection class
/
I
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
OBJ_BUCH-1407-001.book Page 38 Monday, January 17, 2011 2:58 PM
