16
| Français
1 609 929 X58 | (12.5.11)
Bosch Power Tools
To
increase
the
retraction force
, press the spring catch
inward and turn the hex key
28
clockwise.
– For type 0 607 950 952, 4 turns (max.).
– For type 0 607 950 953, 5,6 turns (max.).
Type 0 607 950 954 | ... 955 | ... 956
f
Wear protective gloves and firmly hold the hex key
when adjusting the load capacity.
When the maximal
load capacity is set, the spring of the load-capacity adjust-
er is under great tension, which can suddenly be released
when pushing in the hex key.
Insert hex key
9
into set screw
29
. The set screw acts on the
spring catch of load-capacity adjuster
6
.
To
decrease
the
retraction force
, turn hex key
9
counter-
clockwise.
To
increase
the
retraction force
, turn hex key
9
clockwise.
– For type 0 607 950 954, 11½ turns (max.).
– For type 0 607 950 955, 10 turns (max.).
– For type 0 607 950 956, 4¼ turns (max.).
Type 0 607 950 957 | ... 958
f
Wear protective gloves and firmly hold the hex key
when adjusting the load capacity.
When the maximal
load capacity is set, the spring of the load-capacity adjust-
er is under great tension, which can suddenly be released
when pushing in the hex key.
Insert hex key
9
into the spring catch of the load-capacity ad-
juster
6
.
To
decrease
the
retraction force
, press the spring catch
inward and turn the hex key
9
counterclockwise.
To
increase
the
retraction force
, press the spring catch
inward and turn the hex key
9
clockwise.
– For type 0 607 950 957, 11 turns (max.).
– For type 0 607 950 958, 5 turns (max.).
Maintenance and Service
Maintenance and Cleaning
If the balancer or spring pull should fail despite the care taken
in manufacture and testing, repair should be carried out by an
authorized customer services agent for Bosch power tools.
In all correspondence and spare parts orders, please always
include the 10-digit number given on the nameplate of the
balancer or spring pull.
Balancers
f
Disconnect the air supply before carrying out mainte-
nance, making any load-capacity adjustments, or con-
necting or removing the air tool.
This safety measure
prevents accidental starting of the air tool.
f
Check the suspension quick-link and the securing hook
daily for corrosion and damage. Have the balancer, es-
pecially the compressed-air hose, checked at least
once every year through an expert according to the re-
spectively appropriate country-specific regulations.
In
case of damage, the balancer may not continue to be used.
Apply grease to all exterior moving parts, such as the friction
points of the suspension quick-link
2
and the securing eye
4
.
Clean the sieve at the air intake of the balancer regularly. For
this, unscrew the hose fitting
14
and remove any dust and de-
bris from the sieve. Afterwards, retighten the hose fitting again.
To avoid damage to interior valve components of the balancer
when screwing hose fitting
14
in or out, it is recommended to
counter-hold the projecting connection socket of air intake
7
with an open-end wrench (size 17 mm).
Observe the recommendations for admixtures to
the compressed air, as specified in the operating
instructions of the air tool used on the balancer!
Spring Pulls
f
Check the rope, the suspension quick-link and the se-
curing hook (where available) daily for corrosion and
damage. Have the spring pull, especially the rope,
checked at least once every year through an expert ac-
cording to ISO 4309.
In case of damage, the spring pull
may not continue to be used.
Apply grease to all exterior moving parts, such as the friction
points of the suspension quick-link
2
and the securing eye
4
.
Maintaining the cable with an acid-free grease (petroleum
jelly) increases its service life.
Accessories
Information about the complete quality accessory program
can be found on the Internet at
www.bosch-pt.com and
www.boschproductiontools.com or at your dealer.
After-sales Service and Customer Assistance
Robert Bosch GmbH is responsible for the delivery of the prod-
uct in accordance with the sales contract within the framework
of the legal/country-specific regulations. For claims with re-
spect to the tool, please contact the following location:
Fax: +49 (711) 7 58 24 36
www.boschproductiontools.com
Disposal
The balancer or spring pull, accessories and packaging should
be sorted for environmental-friendly recycling.
f
Observe all applicable environmental regulations when
disposing of old grease and solvents.
When your balancer or spring pull is no longer suitable for use,
please return it to a recycling center or a specialist store, e.g.,
at an authorized customer service agent for Bosch power tools.
Subject to change without notice.
Français
Avertissements de sécurité
Il est impératif de lire et de respecter toutes
les instructions.
GARDER PRECIEUSEMENT
CES INSTRUCTIONS.
OBJ_BUCH-1327-002.book Page 16 Thursday, May 12, 2011 2:07 PM
