72
Bosch Rexroth AG
ES+CC-ES.book Seite 78 Montag, 14. Mai 2018 7:45 07
ErgoSpin/CC-ErgoSpin
| 3608870H86/2020-01
5
Transport and storage
For storing and transporting the product,
always observe the ambient conditions
specified in the technical data of this product.
Information on the technical data is contained in
the corresponding section of these instructions.
About this product
4.2 Components in figures
Components in figures are numbered according
to the representation of the hand-held
nutrunners on the graphical pages.
(1) Tool mount (external square) with safety
pin
(2) Output drive (e.g. angle head)
(3) Flange of the output drive
(4) Union nut
(5) Start switch
(6) Status bar
(7) Tool button
(8) CW/CCW reversal switch ESA/ ESV/
CC-ESA/ CC-ESV
(9) CW/CCW reversal switch ESM/ CESM
(10) Handle
(11) Electric connection
(12) Tightening position illumination
(13) Adapters for handling devices
(14) Rexroth tightening system interface
(15) ErgoSpin connecting cable
(16) Rotatable angle plug
(17) Attachment tools (e.g. socket)
(18) Safety pin
(19) Quick-change chuck sliding collar
(20) Assembly aid
(21) Hook spanner
(22) Grasping surface
Some of the accessories illustrated or described
are not included in the scope of delivery.
