ENGLISH
ENGLISH
IT
A
L
IA
NO
ESPA
ÑOL
SV
ENS
KA
FR
ANÇAIS
ENGL
IS
H
Bosch Rexroth AG
91
Troubleshooting
14 Troubleshooting
Failures and information on faults are displayed
in the tightening system and/or its operating
program, e.g. BS350 (ErgoSpin), BS350 CC-ES
(CC-ErgoSpin, until the BS350 Standard with
V2.400 has been introduced).
If you are not able to remedy a defect, please
contact one of the addresses that you can
either find at
or in section "Service and Sales"
on page 97.
ES+CC-ES.book Seite 97 Montag, 14. Mai 2018 7:45 07
3608870H86/2020-01 |
ErgoSpin/CC-ErgoSpin
15 Technical data
The A-weighted noise pressure level of the
product is typically
≤
65 dB (A). The handarm
vibration is typically lower than 2.5m/s
2
.
The accuracy according to VDI/VDE2647
across a range of 6S in
•
ESM and ESV systems with straight output
drive is less than ± 3 %,
•
ESA and ESV with angle head or offset output
drive is less than ± 4 %,
•
CC-ESM and CC-ESV with straight output
drive is less than ± 5 %,
•
CC-ESA and CC-ESV with angle head or offset
output drive is less than ± 7 %.
Tab.16: General information
General information
Protection class
IP 40
Protection class
I (protective grounding)
Interference suppression
Limit class A according to EN 55011
Electric connection
11-pin round plug
Admissible ambient temperature
0 °C … + 40 °C
Admissible storage temperature
– 20 °C … + 70 °C
Allowed air humidity during operation
20–80 %
Allowed air humidity during storage
20 - 90%
ENGLISH
