92
Bosch Rexroth AG
ES+CC-ES.book Seite 98 Montag, 14. Mai 2018 7:45 07
ErgoSpin/CC-ErgoSpin
| 3608870H86/2020-01
Technical data
Noise/vibration information
Noise emission levels determined according to
EN 62841-2-2
.
The A-weighted sound pressure level of the
electric tool is typically
62 dB(A)
.
Uncertainty K =
3 dB
.
The sound level while working can exceed 80
dB(A).
Ear protection must be worn!
Total vibration levels ah (vector sum of three
directions) and uncertainty K determined
according to
EN 62841-2-2:
Tightening of screws and nuts of max. admissible
size: ah
<
0.3 m/s
2
,
K =
1.5 m/s
2
The vibration level and the noise emission level
stated in these instructions have been measured
in accordance with a standardized measurement
method and can be used for the comparison of
different electric tools. They can also be used for
a preliminary assessment of the vibration and
noise emissions.
The stated vibration level and the noise emission
level represent the main applications of the
electric tool. If, however, the electric tool is used
for other applications, with other attachment
tools or insufficient maintenance, the vibration
level and the noise emission level may be higher.
This can significantly increase the vibration and
noise emissions over the total working time.
For an exact assessment of the vibration and
noise emissions, you should also consider the
times during which the device is switched off or
not actually used although it is running. This can
significantly reduce the vibration and noise
emissions over the total working time.
Specify additional safety measures for protection
of the user against the impact of vibrations, such
as: maintenance of electric tools and attachment
tools, keeping hands warm, organization of work
processes.
