English |
11
(2)
Battery adapter
(3)
Heating elements
(4)
Connector plug
(5)
Inside pocket for battery adapter
(6)
Inside pocket for large documents
(7)
Battery
A)
(8)
Battery release button
(9)
Socket for connector plug
(10)
Belt clip
(11)
USB port
(12)
Activation button for USB connection
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Heated jacket
GHJ 12+18V XA
Article number
1 600 A01 Z..
Sizes
S/M/L/XL/2XL/3XL
Voltage
V
12
Nominal capacity, max.
W
9.5
Heated gilet
GHV 12+18V XA
Article number
1 600 A01 Z..
Sizes
S/M/L/XL/2XL/3XL
Voltage
V
12
Nominal capacity, max.
W
9.5
Heated hoodie
GHH 12+18V XA
Article number
1 600 A01 Z..
Sizes
S/M/L/XL/2XL/3XL
Voltage
V
12
Nominal capacity, max.
W
9.5
Battery adapter
GAA 12V-21
Article number
1 600 A01 433
USB port
USB 2.0
– Output voltage
V
5.0
– Output current
A
2.1
A)
A) The actual output current depends on the USB device connec-
ted.
Rechargeable battery
– Permitted ambient
temperature during
charging
°C
0 to +35
– Recommended ambi-
ent temperature during
operation
A)
and during
storage
°C
–20 to +50
Recommended re-
chargeable batteries
GBA 10,8V...
GBA 12V...
Rechargeable battery
Recommended chargers
GAL 12 ...
GAX 18 ...
A) Limited performance at temperatures <0 °C
Preparing the Garment
Charging the Battery
u
The battery adapter does not serve as a charger. Do
not use any in-car USB charging cables to charge the
battery.
Using in-car USB charging cables can damage
the battery and/or the battery adapter.
Note:
The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.
u
Do not continue to press the on/off switch after the
heating elements have been automatically switched
off.
This can damage the battery.
Inserting and Removing the Battery
(see figures A1−A2)
u
Do not use force to insert the battery.
The battery is de-
signed in such a way that it can only be inserted into the
battery adapter when it is in the right position.
To
insert
the battery
(7)
, push it all the way into the battery
adapter
(2)
.
To
remove
the battery
(7)
, press the release buttons
(8)
on
the battery and pull it out of the battery adapter
(2)
.
Connecting Heating Elements
(see figures B1–B2)
Plug the connector plug
(4)
into the socket
(9)
on the bat-
tery adapter. The on/off switch
(1)
lights up briefly when the
battery is charged.
Slide the battery adapter
(2)
into the pocket
(5)
provided in
the garment or attach the battery adapter to your belt using
the belt clip
(10)
.
Using the Garment
Switching the Heating Function on/off
(see figure C)
Ensure that the battery
(7)
is charged and correctly inserted
into the battery adapter
(2)
, and that the heating elements
(3)
are connected.
To
heat
, press the on/off switch
(1)
until the LED of the on/
off switch lights up red.
Bosch Power Tools
1 609 92A 5PK | (05.10.2020)
