1 695 102 028
2014-10-10
|
Robert Bosch GmbH
Commissioning | TCE 330-TCE 230 | 27
en
4.2.2
Installing the device on the left-hand
side TCE 230
1.
Remove the filter unit from the housing;
2.
Secure the support in the rear left corner of the tire
changing machine's housing using three bolts.
¶
Tightening torque: 65 N*m
i
Ensure that the bow's surfaces are accurately aligned
with the surfaces of the housing.
Fig. 8:
Support (housing)
3.
Secure the retaining panel to the support using 4
bolts.
Fig. 9:
Retaining panel
4.
Secure the sliding arm to the lateral holder using 4
bolts.
¶
Tightening torque: 65 N*m
Fig. 10: Sliding arm
i
Lubricate the parts to be joined before installation.
