Standards, regulations and directives
Tronic 4000 T – 6721843807 (2022/06)
28
2
Standards, regulations and directives
Observe all regulations and standards during installation and
operation:
•
Regulations for the electrical installation and for the
connection to the electrical supply network
•
Regulations for the electrical installation and for the
connection to the remote signalling and wireless network
•
National standards and regulations
3
About the appliance
3.1
Declaration of conformity
The design and operating characteristics of this product
comply with the European and national requirements.
The CE marking declares that the product complies
with all the applicable EU legislation, which is
stipulated by attaching this marking.
The complete text of the Declaration of Conformity is available
on the Internet: www.bosch-climate.gb.
3.2
Use according to the provisions of applicable
regulations
The appliance was designed for heating and storing potable
water. Please observe all country-specific regulations,
guidelines and standards for potable water.
The appliance should only be installed in closed environments.
Any other use is non-compliant with the regulations. The
manufacturer accepts no responsibility for damages resulting
from any unsuitable use
3.3
Description of the DHW tank
•
Enamel-coated steel storage tank which conforms to
European standards.
•
Built to withstand high pressures.
•
Outer material: sheet steel and plastic.
•
Easy operation.
•
CFC-free polyurethane insulation material.
•
Magnesium galvanic anode.
3.4
Accessories
Fig. 1
Accessories
[1] Screws (2x)
[2] Washers (2x)
[3] Wall plugs (2x)
[4] Galvanic insulation (2x)
[5] Pressure relief valve (8 bar)
