Bosch 1575A, Operating/Safety Instructions Manual

3

gases. Motors in these tools normally spark,
and the sparks might ignite fumes.
• KEEP CHILDREN AWAY.  Do not let
visitors contact tool or extension cord.  All
visitors should be kept away from work areas.

Personal Safety

• GUARD AGAINST ELECTRIC SHOCK.
Prevent body contact with grounded surfaces
such as pipes, radiators, ranges and refrigerator
enclosures. Rubber gloves and non-skid foot-
wear are recommended when working out-
doors, where damp or wet ground may be
encountered. A Ground Fault Circuit Inter-
rupter protected power line must be used for
these conditions.
• DRESS PROPERLY.  Do not wear loose
clothing or jewelry. They can be caught in
moving parts.  Wear protective hair covering to
contain long hair.
• USE SAFETY EQUIPMENT. WEAR

WARNING!

  “READ ALL INSTRUC-

TIONS”.  Failure to follow the SAFETY RULES
identified by the BULLET (•) symbols listed
BELOW and other safety precautions, may
result in serious personal injury.   Keep these
operating instructions with this product.

GENERAL SAFETY RULES

for all Power Tools

Work Area

• KEEP WORK AREAS CLEAN.  Cluttered
areas and benches invite accidents.
• AVOID DANGEROUS ENVIRONMENT.
Don’t use power tools in damp or wet locations.
Do not expose power tools to rain.  Keep work
area well lit.
• AVOID GASEOUS AREAS.  Do not oper-
ate portable electric tools in explosive atmo-
spheres in presence of flammable liquids or

max 200mm

max 130mm

max 70mm

max 300mm

3" blades

5" blades

8" blades

12" blades

cutting depth capacities

9. Lockwasher
10.  Air vents

5. Blade guide
6. Blade set
7. Screw
8. Footplate

1. Paddle On/Off switch
2. Face plate
3. Knurled nut
4. Screw

Product Data - Foam Cutter

Model number

1575A

Identification number

0 601 575 1 . .

(NOTE:  This tool is designed and sold for use with alternating current (AC) only. )

Accessory Listing

Blade set

3" (70mm)

Blade guide

3" (70mm)

Blade set

5" (130mm)

Blade guide

5" (130mm)

Blade set

8" (200mm)

Blade guide

8" (200mm)

Blade set

12" (300mm)

Blade guide

12" (300mm)

Footplate
Blade sharpener w/whetstone
Metal case

(Standard equipment = motor only. Blades, guides and foot plate must be ordered
separatedly.)

Foam Cutter Components