MY22Z0a - 12_1.0_25.07.2022
238
Troubleshooting, fault clearance and repair
9.1.4
Battery error
Symptom
Cause/possible source
Remedy
The battery discharges
quickly.
The battery may be at the end of its
useful life.
Replace old battery with new one.
The battery cannot be
recharged.
Is the charger mains plug firmly
connected to the socket?
1
Disconnect the charger mains plug and plug it in again.
2
Repeat charging process.
3
If the battery still won't recharge, contact your specialist
dealer.
Is the charger plug firmly connected to
battery?
1
Disconnect the charger mains plug and plug it in again.
2
Repeat charging process.
3
If the battery still won't recharge, contact your specialist
dealer.
Is the adapter firmly connected to the
charger plug or the battery's charging
port?
1
Connect the adapter firmly to the charger plug or the battery
charging port.
2
Start the charging process again.
3
If the battery still won't recharge, contact your specialist
dealer.
Is the connection terminal for the
charger, charger adapter or battery
dirty?
1
Wipe with a dry cloth to clean the connection terminals.
2
Repeat charging process.
3
If the battery still won't recharge, contact your specialist
dealer.
The battery does not start
charging when the
charger is connected.
The battery may be at the end of its
useful life.
Replace old battery with new one.
The battery and charger
become hot.
The temperature of the battery or the
charger may have exceeded the
operating temperature range.
1
Interrupt charging process.
2
Wait a moment.
3
Repeat charging process.
4
If the battery is too hot to touch, there might be a problem with
the battery. Contact specialist dealer.
The charger is hot.
If the charger is used continuously to
charge batteries, it may become hot.
1
Wait a moment.
2
Start the charging process again.
The LED on the charger
does not light up.
Is the charger plug firmly connected to
battery?
1
Check connection for any contaminants.
2
Insert charger plug again.
3
Contact your specialist dealer if there is no change.
Is the battery fully charged?
1
The LED on the charger will go out when the battery is fully
charged. This is not a malfunction.
2
Disconnect charger mains plug.
3
Insert mains plug again.
4
Repeat charging process.
5
Contact your specialist dealer if the LED on the charger still
doesn't light up. Contact specialist dealer.
The battery cannot be
removed.
Contact your specialist dealer.
The battery cannot be
inserted.
Contact specialist dealer.
Fluid is leaking from the
battery.
Observe all the warnings in Section 2 Safety.
Table 61: Error solution for battery
Summary of Contents for 22-15-2061
