English |
Bosch Power Tools
1 609 92A 1Z2 | (1.7.16)
Sparks can be created in the
measuring tool which may ignite the dust or fumes.
The magnets on the un-
derside of the measuring tool as well as
the magnets on the ceiling measurement
plate generate a field that can impair the
function of cardiac pacemakers.
The effect of
the magnets on the underside of the measuring tool
and the magnets on the ceiling measurement plate can
lead to irreversible data loss.
Please unfold the fold-out page with the representation of
the measuring tool and leave it unfolded while reading the
operating instructions.
The measuring tool is intended for determining and
checking right angles as well as for aligning tiles in angles
of 45° and 90°.
The numbering of the product features shown refers to
the illustration of the measuring tool on the graphic page.
Exit opening for laser beam
Laser warning label
On/Off button
Magnets
Serial number
Battery lid
Latch of battery lid
Battery indicator
Laser target plate
Levelling plate
Cut-out in the levelling plate
Protective pouch
Laser viewing glasses*
Ceiling measurement plate*
Article number
3 601 K15 200
Working range (with laser target
plate or with ceiling plate)
20 m
1)
Angular accuracy
±0.2 mm/m
2)
Operating temperature
– 10 °C ... +50 °C
Storage temperature
– 20 °C ... +70 °C
Relative air humidity, max.
90 %
Laser class
2
Laser type
635 nm, <1 mW
Divergence
– Laser line
0.5 mrad (full angle)
C
6
1
Batteries
4 x1.5 VLR6 (AA)
Operating life time
– with 2 laser lines
– with 3 laser lines
18 h
12 h
Automatic switch-off after approx.
30 min
Weight according to
EPTA-Procedure 01:2014
0.44 kg
Dimensions
156 x102 x98 mm
Degree of protection
IP54 (dust and
splash water
protected)
1) The working range can be decreased by unfavourable environ-
mental conditions (e.g. direct sun irradiation).
2) The angular accuracy between the 45° laser line and the 90° la-
ser line is max. ±0.4 mm/m.
The measuring tool can be clearly identified with the serial number
on the type plate.
OBJ_BUCH-828-006.book Page 15 Friday, July 1, 2016 12:52 PM
