8
| English
u
Ensure that battery replacement is carried out prop-
erly.
There is a risk of explosion.
u
Do not attempt to recharge the button cell and do not
short circuit the button cell.
The button cell may leak,
explode, catch fire and cause personal injury.
u
Remove and dispose of drained button cells correctly.
Drained button cells may leak and damage the product or
cause personal injury.
u
Do not overheat the button cell or throw it into fire.
The button cell may leak, explode, catch fire and cause
personal injury.
u
Do not damage the button cell and or take the button
cell apart.
The button cell may leak, explode, catch fire
and cause personal injury.
u
Do not allow damaged button cells to come into con-
tact with water.
Leaking lithium may mix with water to
create hydrogen, which could cause a fire, an explosion,
or personal injury.
u
Do not use the measuring tool if the button cell holder
(21)
does not close.
Remove the button cell and have it
repaired.
u
Remove the rechargeable battery/non-rechargeable
batteries from the measuring tool before carrying out
work on the measuring tool (e.g. assembly, mainten-
ance, etc.). The battery/batteries should also be re-
moved for transport and storage.
There is risk of injury
from unintentionally pressing the on/off switch.
u
Caution! When using the measuring tool with
Bluetooth
®
, a fault may occur in other devices and sys-
tems, aeroplanes and medical devices (e.g. pace-
makers, hearing aids). Also, damage to people and an-
imals in the immediate vicinity cannot be completely
excluded. Do not use the measuring tool with
Bluetooth
®
in the vicinity of medical devices, petrol
stations, chemical plants, areas with a potentially ex-
plosive atmosphere and in blasting areas. Do not use
the measuring tool with
Bluetooth
®
on aeroplanes.
Avoid using the product near your body for extended
periods.
The
Bluetooth
word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The measuring tool is intended for determining and checking
horizontal and vertical lines.
The measuring tool is suitable for indoor and outdoor use.
Product Features
The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
(1)
Laser beam outlet aperture
(2)
State of charge of battery pack/non-rechargeable
batteries
(3)
Pendulum lock indicator
(4)
Receiver mode button
(5)
Receiver mode indicator
(6)
Button for laser operating mode
(7)
Bluetooth®
connection indicator
(8)
Bluetooth®
button
(9)
Battery bay
(10)
Battery adapter cover
A)
(11)
Non-rechargeable batteries
A)
(12)
Rechargeable battery/battery adapter release
button
A)
(13)
Battery adapter cap
A)
(14)
Rechargeable battery
A)
(15)
On/off switch
(16)
1/4" tripod mount
(17)
5/8" tripod mount
(18)
Serial number
(19)
Laser warning label
(20)
Button cell
A)
(21)
Button cell holder
(22)
Button cell port
(23)
Magnet
A)
(24)
Universal holder
A)
(25)
Rotating platform
A)
(26)
Remote control
A)
(27)
Laser target plate
A)
(28)
Laser receiver
A)
(29)
Laser goggles
A)
(30)
Protective bag
A)
(31)
Tripod
A)
(32)
Telescopic rod
A)
(33)
Case
A)
(34)
Inlay
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
1 609 92A 5DN | (26.03.2020)
Bosch Power Tools
®
