1 6 |
Bosch 3H/2C Touch-Technology Thermostat
Installation, Operation & Application Manual
08.2016
|
Bosch Thermotechnology Corp.
Data subject to change
6.5 Setting the program schedule
The thermostat has four periods (WAKE, LEAVE, RETURN, SLEEP) that are
customizable for each day of the week. Each period will have a start time, heat
temperature, and cool temperature. The thermostat monitors the day and time, while
maintaining the specifi c conditions you have chosen for each period in your program.
Setting the program schedule:
1. Press , then press
until EDIT is displayed.
2. Press to enter Program Schedule.
3.
The day of the week fl ashes. Use the
or
to select the day of the week.
You can select the days individually, or if you keep going, there is an option
for MON-FRI, MON-SUN or SAT-SUN.
4. Press to continue.
5.
The period (WAKE, LEAVE, RETURN, SLEEP) begins fl ashing. Use the
or
to select the desired period.
6. Press to continue.
7.
Hour fl ashes. Use the
or
to select the hour when you want the current
period to begin.
8. Press to continue.
9.
The minutes fl ash. Use the
or
to select the minutes when you want the
current period to begin.
10. Press to continue.
11.
The HEAT temperature fl ashes. Use the
or
to set the desired heat
temperature.
12. Press to continue.
13.
The COOL temperature fl ashes. Use the
or
to set the desired cool
temperature.
14. Press to continue.
15.
Continue to set your entire schedule.
16. Press to exit.
6.6 View screen options
1. Press , then press
repeatedly until the
option displays
then press
.
2. Press to advance to the next screen.
3. Press to go to previous screen.
These screens are visible when the thermostat is locked or unlocked.
View fault Screen
VIEW
Day
Month
Figure 31
View month, day, and year
VIEW
Day
Month
Year
Figure 32
View program schedule settings
—
OFF
shows when schedule is off.
—
SETTINGS
show when schedule is on.
VIEW
SCHEDULE
SLEEP
Mon
Figure 33
