English |
35
Bosch Power Tools
1 609 92A 0PU | (19.8.14)
Tack Paper (see figures C1–C2)
– Insert a suitable staple strip
9
.
– Click the lugs of the paper tacker
11
one by one into the side slots of
the power tool.
– Insert the stack of paper into the paper tacker
11
and position the tack-
er head over the paper surface to be tacked.
– Firmly push the power tool down until the tacker head
1
is pushed in a
few millimetres.
– Keep up the contact pressure and briefly press the trigger
5
.
Once the staple has been completely driven in, release the trigger
5
and lift the tacker head
1
from the stack of paper.
Note:
To load the magazine, you have to dismount the paper tacker from
the cordless tacker.
Tack Booklets (see figures D1–D3)
– Before the first use, you must put the two halves of the booklet maker
12
together.
The booklet maker can no longer be dismounted.
– Insert a suitable staple strip
9
.
– Fold the top sheet (cover) of the stack of paper to be tacked in half, in
order to obtain an indication line for the staple position.
– Open the brackets
13
of the booklet maker
12
and place the paper
stack in the middle, with the cover facing upwards.
– Fold the brackets
13
downwards.
Align the paper stack in such a way that the indication line is visible
through the slots of the brackets.
– Firmly place the tacker head
1
against one of the slots
first
, until it is
pushed in a few millimetres.
– Keep up the contact pressure and briefly press the trigger
5
.
Once the staple has been completely driven in, release the trigger
5
and lift the tacker head
1
from the bracket.
– Repeat the steps for the second slot.
– Lift back the brackets
13
, remove the tacked paper stack and fold it in
half.
OBJ_BUCH-1433-005.book Page 35 Tuesday, August 19, 2014 11:25 AM
