Access Easy Controller
Card Reader Keypad Functions | en
163
Bosch Security Systems
Hardware Manual
Ver 2.0.0 | 2006.07
2.
Key in your card number followed by the
or
key. If the card number is valid,
the door will be release momentarily for access. However, if the card number is not valid,
the LED will flash at a fast rate.
Please follow the next set of procedures if PIN code is required.
Manual Card Entry with PIN code
1.
First, press the
key, The LED flash continuously at a slow rate for the duration as
depicted in the Keypad Timeout field.
2.
Key in your card number followed by the
or
key. If the card number is valid,
the LED will flash at a medium rate. However, if the card number is not valid, the LED will
flash at a fast rate.
3.
Enter the PIN code (followed by the
or
key if it is less than 7 digits). If the
PIN code is correct, the door will be release momentarily for access. However, if the PIN
code is not wrong, the LED will flash at a fast rate.
Reader's PIN code
When this mode is selected, all cardholders use a pre-determined Reader's PIN code to gain
access. No card is required. This setting is done in Card Readers, PIN Code Settings, Reader's
PIN code (1-7 digits).
To gain access, enter the Reader's PIN code (followed by the
or
key if it is less
than 7 digits).
21.2.3
Other Usage
The following sections highlight the other usage of the Reader beside Door Access.
Time Clock Functions
Besides using the card for door access, it can be used for time clocking. For example, an
employee reports for work will be granted access to the building at the same time, he/she can
clock-in. These transactions are capture and presented in the Time Attendance web page
which can be exported in Comma Separated Variable (csv) format and can be used by third
party payroll software. The function can also be used to capture the time the guards visited
the checkpoint.
i
NOTICE!
No set-up is required in the AEC web page.
