1 689 988 238
2012-11-06
|
Robert Bosch GmbH
114 | ACS 651/751 | Program description
en
6.13.8 Executing recovery when the engine and the
A/C system are not OK
i
After executing step 12 of chapter 6.13.5, the recov-
ery phase is initiated. After the oil drain is complet-
ed, the following screen is displayed.
The recovery phase continues till the absolute pressure
is 600 mbar. When the recovery is completed, it is pos-
sible to select and execute the other operating phases.
6.13.7 Executing recovery when the engine is OK
and the A/C system is not OK
i
After executing step 12 of chapter 6.13.5, the follow-
ing screen is displayed.
1.
Follow the instructions on the screen and press
E
.
The following screen is displayed.
2.
Follow the instruction on the screen and press
E
.
The recovery phase is initiated.
i
After the oil drain is completed, the following screen
is displayed.
3.
Follow the instructions on the screen and press
E
.
i
The recovery phase continues till the absolute pres-
sure is 600 mbar. When the recovery is completed, it
is possible to select and execute the other operating
phases.
